Xconfiguration Audio Input Microphone [1..8] Level; Xconfiguration Audio Output Hdmi [1 - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xConfiguration Audio Input Microphone [1..8] Level

Define the audio level of the Microphone input connector.
See the Audio Level table in the Physical Interface Guide for the codec for a complete overview
of the values represented in dB.
Requires user role: ADMIN, INTEGRATOR
Default value: 58
USAGE:
xConfiguration Audio Input Microphone
where
: Unique ID that identifies the microphone input. Range: 1..8
n
: Integer (0..70)
Level
Select a value between 0 and 70, in steps of 1 dB.
xConfiguration Audio Input Microphone [1..8] Mode
Disable or enable audio on the microphone connector.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Input Microphone
where
: Unique ID that identifies the microphone input. Range: 1..8
n
: Off/On
Mode
Off: Disable the audio input microphone connector.
On: Enable the audio input microphone connector.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xConfiguration
n Level: Level
n Mode: Mode
xCommand
xConfiguration Audio Input Microphone [1..8] Type
The microphone connectors are intended for electret type microphones. The microphone
connector can be set to line or microphone mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Microphone
USAGE:
xConfiguration Audio Input Microphone
where
: Unique ID that identifies the microphone input. Range: 1..8
n
: Line/Microphone
Type
Microphone: Select Microphone when you have 48 V Phantom voltage and the
pre-amplification is On.
Line: Select Line when you have a standard balanced line input. The phantom voltage
and pre-amplification is Off.
xConfiguration Audio Output HDMI [1..2] Level
Define the output level of the HDMI output connector, in steps of 1 dB.
Requires user role: ADMIN, INTEGRATOR
Default value: 0
USAGE:
xConfiguration Audio Output HDMI
where
: Unique ID that identifies the HDMI output. Range: 1..2
n
: Integer (-24..0)
Level
Select a value between -24 and 0, in steps of 1 dB.
40
API Reference Guide
xStatus Appendices
n Type: Type
n Level: Level
Copyright © 2017 Cisco Systems, Inc. All rights reserved.