Cisco TelePresence SX80 Reference Manual page 164

Cisco TelePresence SX80

Introduction
xStatus Audio Output LocalOutput [n] Loudspeaker
Shows the Loudspeaker mode on the local output. If one or more of the output connectors that
are attached to the local output are connected to a loudspeaker, then this signal should be a
reference signal to the echo canceler and Loudspeaker should be set to On.
You can run the command xStatus Audio Output LocalOutput to find the identity [n] of the
output.
Requires user role: ADMIN, USER
Value space of the result returned:
On/Off
Example:
xStatus Audio Output LocalOutput 4 Loudspeaker
*s Audio Output LocalOutput 4 Loudspeaker: "Off"
** end
xStatus Audio Output LocalOutput [n] Name
Shows the name of the local output.
You can run the command xStatus Audio Output LocalOutput to find the identity [n] of the
output.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Audio Output LocalOutput 4 Name
*s Audio Output LocalOutput 4 Name: "MyLocalOutput1"
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
xStatus Audio Output LocalOutput [n] VolumeControlled
Shows whether this output's volume is controlled by global audio control (Off), or if it is at the
level defined with xCommand Audio Volume Set (On).
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Audio Output LocalOutput 5 VolumeControlled
*s Audio Output LocalOutput 5 VolumeControlled: "On"
** end
xStatus Audio Output RemoteOutput [n] CallId
Shows the CallId for the remote audio output.
You can run the command xStatus Audio Output RemoteOutput to find the identity [n] of the
output.
Requires user role: ADMIN, USER
Value space of the result returned:
1..65534
Example:
xStatus Audio Output RemoteOutput 9 CallId
*s Audio Output RemoteOutput 9 CallId: 28
** end
164
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.