Cisco TelePresence SX80 Reference Manual page 178

Cisco TelePresence SX80

Introduction
Diagnostics status
xStatus Diagnostics Message [n] Description
Shows a description of the current diagnostics alerts.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Diagnostics Message Description
*s DiagnosticsResult Message 1 Description: "IP configuration incomplete"
** end
xStatus Diagnostics Message [n] Level
Shows the level of importance of the diagnostics message.
Error: There is an error in the system. The system can still be used, but there can be some
restrictions.
Warning: A problem is detected and a more specific report follows indicating the exact problem.
Critical: The warning level is critical. The system cannot be used.
Requires user role: ADMIN, USER
Value space of the result returned:
Error/Warning/Critical
Example:
xStatus Diagnostics Message 4 Level
*s Diagnostics Message 4 Level: Warning
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
xStatus Diagnostics Message [n] References
Additional information on the diagnostics alert, if available.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Diagnostics Message 10 References
*s Diagnostics Message 10 References: "delay=190"
** end
178
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.