Xconfiguration Cameras Camera [1..7] Gamma Level - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xConfiguration Cameras Camera [1..7] Gamma Level

By setting the Gamma Level you can select which gamma correction table to use. This setting
may be useful in difficult lighting conditions, where changes to the brightness setting does
not provide satisfactory results. Requires the Cameras Camera [n] Gamma Mode to be set to
Manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 0
USAGE:
xConfiguration Cameras Camera n
where
: Unique ID that identifies the camera. Range: 1..7
n
: Integer (0..7)
Level
Define the gamma level.
xConfiguration Cameras Camera [1..7] Mirror
With Mirror mode (horizontal flip) you can mirror the image on screen. Mirroring applies both to
the self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera n
where
: Unique ID that identifies the camera. Range: 1..7
n
: Auto/Off/On
Mirror
Auto: If the camera detects that it is mounted upside down, the image is automatically
mirrored. If the camera cannot auto-detect whether it is mounted upside down or not,
the image is not changed.
Off: Display the image as other people see you.
On: Display the image as you see yourself in a mirror.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xConfiguration
Gamma Level: Level
Mirror: Mirror
xCommand
xConfiguration Cameras Camera [1..7] Whitebalance Mode
Define the camera white balance mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera
where
: Unique ID that identifies the camera. Range: 1..7
n
: Auto/Manual
Mode
Auto: The camera will continuously adjust the white balance depending on the camera
view.
Manual: Enables manual control of the camera white balance. The white balance level is
set using the Cameras Camera [n] Whitebalance Level setting.
xConfiguration Cameras Camera [1..7] Whitebalance Level
Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be set
to manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Cameras Camera
where
: Unique ID that identifies the camera. Range: 1..7
n
: Integer (1..16)
Level
The white balance level.
45
API Reference Guide
xStatus Appendices
n Whitebalance Mode: Mode
n Whitebalance Level: Level
Copyright © 2017 Cisco Systems, Inc. All rights reserved.