Xcommand Audio Localinput Update - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xCommand Audio LocalInput Update

Update the settings of the local input given by the input ID.
Run xStatus Audio Input LocalInput to get an overview of all local inputs. This command is
mainly intended for internal use by the CE Console. If you don't use CE Console, you need to
manually add the command in a startup script in order to make the definition persistent over a
reboot.
Requires user role: ADMIN
USAGE:
xCommand Audio LocalInput Update InputId:
MixerMode AGC: AGC Mute: Mute Channels:
where
: Integer (0..65534)
InputId
The unique identifier for the local input. It was generated when the local input was
created with the xCommand Audio LocalInput Add command.
: String (0, 255)
Name
Choose a name that describes the local input.
: Auto/Fixed/GainShared
MixerMode
Auto: If one input signal is dominating, the signal on the other connectors are attenuated
with 20 dB each.
Fixed: The input signals all have the same weight, and consequently they are mixed
together with equal gains.
GainShared: If one or some of the input signals dominate, the rest of the input signals
are attenuated by a few dB so that the total gain of the mixed signal remains the same
all the time.
Auto and GainShared are intended for the microphone¬; Fixed is recommended for Line
and HDMI inputs.
: On/Off
AGC
On: Adjust the gain continuously to maintain a constant sound level).
Off: No automatic gain control.
: On/Off
Mute
On: Mutes the mix of input signals.
Off: No muting.
: Integer (1..2)
Channels
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration
InputId Name: "Name" MixerMode:
Channels
xCommand xCommand
1: Mix the input signals into a mono signal.
2: Mix the input signals into a stereo signal.
104
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.