Cisco TelePresence SX80 Reference Manual page 211

Cisco TelePresence SX80

Introduction
xStatus Video Output Connector [n] Connected
Describes whether a device (for example a display) is connected to the output connector or not.
When a display enters standby mode, the endpoint may not be able to detect it. The connector
status will then return False/Unknown even if the display is physically connected.
True: A device is connected to the video output connector.
False: Nothing is connected to the video output connector.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
True/False
Example:
xStatus Video Output Connector 1 Connected
*s Video Output Connector 1 Connected: True
** end
xStatus Video Output Connector [n] ConnectedDevice CEC DeviceType
Shows the type of CEC enabled device connected to the HDMI output the codec has detected.
This information is only available when the device connected to the HDMI output has the
CEC feature configured on and the codec has the configuration xConfiguration Video Output
Connector [n] CEC Mode set to on.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Unknown/TV/Reserved/Recorder/Tuner/Playback/Audio
Example:
xStatus Video Output Connector 1 ConnectedDevice CEC DeviceType
*s Video Output Connector 1 ConnectedDevice CEC DeviceType: TV
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
xStatus Video Output Connector [n] ConnectedDevice CEC Name
Returns the name of the connected device.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
String
Example:
xStatus Video Output Connector 1 ConnectedDevice CEC Name
*s Video Output Connector 1 ConnectedDevice CEC 1 Name: "LG SIGNAGE TV"
** end
xStatus Video Output Connector [n] ConnectedDevice CEC PowerControl
Shows whether the codec is controlling the CEC enabled device connected to the HDMI output.
This information is only available when the device connected to the HDMI output has the
CEC feature configured on and the codec has the configuration xConfiguration Video Output
Connector CEC Mode set to on.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Unknown/Ok/In progress/Failed to power on/Failed to standby
Example:
xStatus Video Output Connector 1 ConnectedDevice CEC PowerControl
*s Video Output Connector 1 ConnectedDevice CEC PowerControl: Ok
** end
211
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.