Cisco TelePresence SX80 Reference Manual page 196

Cisco TelePresence SX80

Introduction
Proximity status
xStatus Proximity Services Availability
Shows whether proximity services are available on the endpoint.
Available: Proximity mode has been enabled with the command xConfiguration Proximity Mode
and one or more of the proximity services have been enabled with xConfiguration Proximity
Services commands.
Disabled: Proximity mode has been disabled with xConfiguration Proximity Mode, or none of the
services have been enabled with the xConfiguration Proximity Services commands.
Deactivated: Proximity services have been deactivated with the command xCommand Proximity
Services Deactivate.
Requires user role: ADMIN, USER
Example:
xStatus Proximity Services Availability
*s Proximity Services Availability: Disabled
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
RoomAnalytics status
xStatus RoomAnalytics PeoplePresence
Shows if there are people present in the room or not. It takes a minimum of two minutes to
detect whether people are present or not in the room. After the room gets vacant, it may take
up to two minutes for the status to change. This feature is based on ultrasound. The video
system will not keep record of who was in the room, only whether or not there are people
present in the room.
Requires user role: ADMIN, USER
Value space of the result returned:
Yes/No/Unknown
Example:
xStatus RoomAnalytics PeoplePresence
*s RoomAnalytics PeoplePresence: No
** end
196
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.