Cisco TelePresence SX80
Introduction
xCommand Audio LocalInput Remove
Remove the local input given by the input ID.
Run xStatus Audio Input LocalInput to get an overview of all local inputs.
This command is mainly intended for internal use by the CE Console. If you don't use CE
Console, you need to manually add the command in a startup script in order to make the defini-
tion persistent over a reboot.
Requires user role: ADMIN
USAGE:
xCommand Audio LocalInput Remove InputId:
where
: Integer (0..65534)
InputId
The unique identifier of the local input. It was generated when the local input was
created with the xCommand Audio LocalInput Add command.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API
xConfiguration
InputId
xCommand
xCommand
xCommand Audio LocalInput RemoveConnector
Detach an input connector from the local input given by the input ID. You need to enter both the
connector's type and number (ConnectorType, ConnectorId) to uniquely identify the connector.
Run xStatus Audio Input LocalInput to get an overview of all local inputs.
This command is mainly intended for internal use by the CE Console. If you don't use CE
Console, you need to manually add the command in a startup script in order to make the defini-
tion persistent over a reboot.
Requires user role: ADMIN
USAGE:
xCommand Audio LocalInput RemoveConnector InputId:
ConnectorType
ConnectorId:
ConnectorId
where
: Integer (0..65534)
InputId
The unique identifier for the local input. It was generated when the local input was
created with the xCommand Audio LocalInput Add command.
: HDMI/Line/Microphone
ConnectorType
Select the connector type.
: Integer (1..3) for an HDMI connector; Integer (1..4) for a Line connector; Integer
ConnectorId
(1..8) for a microphone connector
Select a connector. The connectors are numbered from left to right on the codec
connector panel (as seen from rear).
103
API Reference Guide
xStatus
Appendices
InputId
ConnectorType:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.