Cisco TelePresence SX80 Reference Manual page 165

Cisco TelePresence SX80

Introduction
xStatus Audio Output RemoteOutput [n] Input [n] Gain
Shows the gain (dB) on the input, when input is connected to the remote output. Range from
-54 dB to 15 dB, where -54 dB equals Off.
You can run the command xStatus Audio Output RemoteOutput to find the identity [n] of the
output and input.
Requires user role: ADMIN, USER
Value space of the result returned:
-54..15
Example:
xStatus Audio Output RemoteOutput 9 Input 1 Gain
*s Audio Output RemoteOutput 9 Input 1 Gain: 0
** end
xStatus Audio Volume
Shows the volume level (dB) of the loudspeaker output.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
0..100
Example:
xStatus Audio Volume
*s Audio Volume: 70
** end
xStatus Audio VolumeMute
Shows whether the endpoint volume is set to mute.
Requires user role: ADMIN, USER
Value space of the result returned:
Off/On
Example:
xStatus Audio VolumeMute
*s Audio VolumeMute: Off
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
Bookings status
xStatus Bookings Current Id
The ID of the on going booking event, if any.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Bookings Current Id
*s Bookings Current Id: "123"
** end
165
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.