Xcommand Video Matrix Swap; Xcommand Video Matrix Unassign; Xcommand Video Presentationpip Set; Xcommand Video Presentationview Set - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xCommand Video Matrix Swap

Swap the content defined with xCommand Video Matrix Assign between two outputs.
xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout
commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Matrix Swap OutputA:
where
: Integer (1..3)
OutputA
The output you are swapping from.
: Integer (1..3)
OutputB
The output you are swapping to.

xCommand Video Matrix Unassign

Remove a source from an output. Just as with xCommand Video Matrix Assign the layout
engine will recompose the remaining sources automatically.
xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout
commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Matrix Unassign Output:
where
: Integer (1..3)
Output
Choose the output you wish to remove the source from.
: Integer (1..4)
SourceId
The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Source.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration
OutputA OutputB: OutputB
Output SourceId: SourceId
xCommand xCommand

xCommand Video PresentationPIP Set

Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position:
where
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
Position
UpperRight
Select one of the predefined positions.

xCommand Video PresentationView Set

Set the presentation view mode
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationView Set View:
where
: Default/Maximized/Minimized
View
Select Default when you want the presentation to be viewed with the default settings
for the codec. Select Maximized when you want the presentation to be displayed in full
screen. Select
Minimized when you want the presentation to be displayed in a small picture on screen.
153
API Reference Guide
xStatus Appendices
Position
View
Copyright © 2017 Cisco Systems, Inc. All rights reserved.