Cisco TelePresence SX80 Reference Manual page 167

Cisco TelePresence SX80

Introduction
xStatus Call [n] DisplayName
Shows the name of the remote (far end) participant in an incoming or outgoing call. You can run
the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Call 27 DisplayName
*s Call 27 DisplayName: "firstname.lastname@company.com"
** end
xStatus Call [n] Duration
Shows the duration of a call (in seconds). You can run the command xStatus Call to find the call
identity.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Call 27 Duration
*s Call 27 Duration: 2354
** end
xStatus Call [n] Encryption Type
Shows the encryption type of the call. You can run the command xStatus Call to find the call
identity.
Requires user role: ADMIN, USER
Value space of the result returned:
None/Aes-128
Example:
xStatus Call 27 Encryption Type
*s Call 27 Encryption Type: "None"
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
xStatus Call [n] FacilityServiceId
When calling a facility service, the facility service id is shown. Otherwise the value 0 is returned.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
0..5
Example:
xStatus Call FacilityServiceId
*s Call 3 FacilityServiceId: 1
** end
xStatus Call [n] HoldReason
Shows the reason the current outgoing call was put on hold.
Conference: On hold while the call is being merged into a conference.
Transfer: On hold while the call is being transferred.
None: All other instances.
Requires user role: ADMIN, USER
Value space of the result returned:
Conference/Transfer/None
Example:
xStatus Call 2 HoldReason
*s Call 2 HoldReason: None
** end
167
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.