Connect Headset Cable; Adjust Headset / Microphone And Secure Cable - Honeywell Thor VM2 User Manual

Connect Headset Cable

The CANbus/Audio connector supports a headset adapter cable or a CANbus cable. The Thor VM2 does not support con-
necting audio and CANbus simultaneously.
Headphones
See CANbus / Audio Connector
1. Seat the D15 cable end connector firmly over the CANbus/Audio Connector on the dock.
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
click!
3. Slide the cable ends together until they click shut. Do not twist or bend the connectors. The Thor VM2 internal
microphone and speakers are automatically disabled when the headset is connected.

Adjust Headset / Microphone and Secure Cable

The headset consists of an earpiece, a microphone, a clothing clip and a cable.
4 - 42
Microphone
To Audio cable
(page 8-8) for connector pinouts.
To headset
To Audio
connector
on dock