Usb Connector; Usb Host/Client Y Cable - Honeywell Thor VM2 User Manual

USB Connector

PIN 5 PIN 1
PIN 9 PIN 6

USB Host/Client Y Cable

D9 Male Connector
PIN 1
PIN 6
USB Host Connector
PIN 4
PIN 1
USB Client Connector
The USB client connection is not supported on the Thor VM2 with the Windows Embedded Standard operating
system.
8 - 6
Pin Signal
1 GND
2 USBC_D+
3 USBC_D-
4 USB_H1_PWR
5 GND
6 GND
7 USB_H1_D+
8 USB_H1_D-
9 USBC_VBUS
Pin Signal
1 GND
PIN 5
2 USBC_D+
3 USBC_D-
4 USB_H1_PWR
PIN 9
5 GND
6 GND
7 USB_H1_D+
8 USB_H1_D-
9 USBC_VBUS
Pin Signal
1 5V_USB
2 USB_H1_D-
3 USB_H1_D+
4 GND
Shell CGND
Description
Common ground
USB client data signal (not used)
USB client data signal (not used)
USB host 1; 5V output power
Common ground
Common ground
USB host 1 data signal
USB host 1 data signal
USB client 5V detect from attached host (not used)
Description
Common ground
USB client data signal (not used)
USB client data signal (not used)
USB host 5V output power
Common ground
Common ground
USB host 1 data signal
USB host 1 data signal
USB client 5V detect from attached host
Description
USB Power, Current Limited
USB D-
USB D+
USB Power Return
Chassis Ground