Modifying Settings; Using The Ccu - Honeywell Thor VM2 User Manual

Shortcut key Action
CTRL + C Copies the selected data to the clipboard
CTRL + V Pastes the data from the clipboard at the current location
CTRL + I Displays import setting list
CTRL + L Modified settings are applied
CTRL + B Basic settings are displayed
CTRL + D Advanced settings are displayed

Modifying Settings

Advanced user only. Basic user cannot view the expanded tree or modify settings.
When settings have been loaded (either from Registry > Import Settings or File > Open) the following screen is dis-
played.
The left side of the upper pane displays the current program settings that have been imported or are part of the open
ccf file. Click the + icon to expand the tree or the - icon to condense the tree. When the tree is expanded sufficiently to
view the settings, the settings are displayed in the right portion of the upper pane. When a parameter is selected, the
name of the parameter is highlighted in blue. The parameter name remains highlighted in blue (regardless of if the
value was changed or not) until the parameter name button is tapped a second time. Enter a new value for the param-
eter as desired. Depending on the parameter selected, the following entry types are available:
• Text box - This is an open entry field and a new value can be typed into the text box. Depending on the parameter,
there may be validity checking to ensure the entry in the text box is within the valid range.
• Pull-down list - A down arrow indicates the setting must be selected from a pull-down list of available values. Expand
the list and select the desired setting from the list of options.
• Button - Items with two choices (such as Off or On) are displayed as a button. Tapping the button switches the value
for the parameter.
When all desired parameter settings have been made, tap File > Save to save as a ccf file which can be used to
deploy these settings on another Thor VM2.
If the parameter setting changes should also be applied to this Thor VM2, select Registry > Import Settings. After
importing the settings, a reboot is necessary for the changes to take effect on the Thor VM2.
Do not attempt to modify programmable key settings within the CCU GUI. Instead, make all programmable key
changes using the Programmable Key
CCU.

Using the CCU

Refer to the following examples for instructions on using the CCU.
(page 5-36) control panel before importing the OS Control Panel into the
5 - 55