View Ups Battery Status - Honeywell Thor VM2 User Manual

View UPS Battery Status

Power Meter
Windows Embedded Standard 2009 only
(Start) > Control Panel > Power Options > Power Schemes tab (Classic View)
(Start) > Control Panel > Performance and Maintenance> Power Options > Power Schemes tab (Cate-
gory View)
On the Power Meter tab, battery #1 refers to the UPS battery.
Shows power status: external power or UPS battery and the total battery power remaining before a recharge is
necessary.
Power Notification Icon
Windows Embedded 7 and Windows 7 Professional only
The Power icon in the notification area provides an indication of the level of UPS battery charge. The icon also
indicates if external power is connected. Some samples are shown below
External power is connected and the UPS battery is approximately 50% charged.
External power not connected and the UPS battery is approximately 100% charged.
5 - 31