Honeywell Thor VM2 User Manual page 53

Step 2 – Attach RAM Mount Ball to the Thor VM2 Dock
1. Turn the Thor VM2 off before attaching the RAM mount ball.
2. Place the Thor VM2 face down on a stable surface.
3. If using the external keyboard mount, position the Keyboard Bracket and the Size D RAM ball on the rear of the
Thor VM2 dock, aligning the holes on the back of the Thor VM2 dock with the holes on the bracket and the RAM
ball base.
4. If not using the external keyboard mount, position the RAM ball on the rear of the Thor VM2 dock, aligning the
holes on the back of the Thor VM2 dock with the holes on the RAM ball base. Attach with four M5 screws, flat
washers and lock washers.
5. If using the external keyboard mount, attach the Size C RAM ball to the Thor VM2 Keyboard bracket with four M5
nuts, flat washers and lock washers.
4 - 9