Honeywell Thor VM2 User Manual page 183

To use Sign-On credentials:
• Do not enter a User and Password as the user will be prompted for the Username and Password when connecting
to the network.
To use Stored Credentials:
• Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
• Enter the password.
To use Automatic PAC Provisioning:
• No additional entries are required.
To use manual PAC Provisioning:
• Enter the PAC Filename and PAC Password.
• The PAC file must be copied to the directory specified in the Certs Path global variable. The PAC file must not be
read only.
Ensure the correct Active Profile is selected on the Configuration tab and restart. The Status tab shows the device is
connected.
Note: When using Automatic PAC Provisioning, once authenticated, there is a file stored in the C:\Program
Files\Laird\certs directory with the PAC credentials. If the username is changed, that file must be deleted. The
filename is autoP.00.pac.
6 - 27