Honeywell Thor VM2 User Manual page 241

You can manually load your desired firmware. Select a new firmware manually by clicking the Select New Profile
dropdown menu, selecting a firmware from the menu and tapping the Change button to load. To return to auto-
matic firmware selection, choose Automatic(UMTS) in the dropdown menu.
Note: Switching between CDMA and UMTS firmware is not done automatically. You must select CDMA firmware
manually to connect to CDMA networks. If you want to return to UMTS networks, you must manually select
UMTS firmware.
Activation on CDMA
When CDMA Firmware is selected, the activation of the modem on the CDMA network starts automatically.
During the process of loading CDMA firmware, an activation window pop up allowing a choice between Man-
ual Activation and Automated Activation.
Label
Manual Activation
Automatic Activation
If you cancel the activation or if it fails, you can also start the activation manually by pressing the Activate but-
ton on the General tab.
General
Label Description
Auto Launch When selected OneClick Internet launches automatically when the user starts the Thor VM2
and logs in.
Connect Automati- When selected OneClick Internet automatically connects on start-up.
cally
Reconnect Auto- When selected OneClick Internet reconnects automatically when the Thor VM2 returns from
matically standby/sleep or hibernate.
Allow roaming When selected OneClick Internet allows connections in foreign networks.
Use care when enabling roaming to avoid roaming charges.
Roaming Alert When selected OneClick Internet displays an alert when roaming.
Description
Enter the requested items as direct by a representative
from your carrier.
Use your modem to start an automated activation session
6 - 85