Honeywell Thor VM2 User Manual page 127
Hide thumbs
Also See for Thor VM2:
- User manual (398 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Auto-On Behavior
When the Auto-On power scheme/plan is selected and external power is present the Thor VM2 behaves as
described below. If external power is not present, refer to the
Thor VM2 is Off
Conditions
The Thor VM2 is Off and gets external power, such as
• Thor VM2 is installed on a powered Smart Dock with the dock power switch On
• Thor VM2 is already mounted to a dock and external power is applied to the dock
• Thor VM2 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM2 boots. Once booted the Thor VM2 follows the Auto-On power scheme/plan with timers
reset after the boot completes.
Thor VM2 is On
Conditions
The Thor VM2 is On and gets external power, such as
• Thor VM2 is installed on a powered Smart Dock with the dock power switch On
• Thor VM2 is already mounted to a dock and external power is applied to the dock
• Thor VM2 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM2 continues to run and follows Auto-On power scheme/plan with timers reset at the time
power was connected.
UPS
(page 5-30) section for Thor VM2 behavior.
5 - 29
Advertisement
Table of Contents
