Chapter 28
Configuring Twice NAT
The Add NAT Rule dialog box appears.
Figure 28-57
Step 2
Set the source and destination interfaces:
Figure 28-58
Step 3
For the Original Source Address, click the browse button
network in the Browse Original Source Address dialog box.
a.
Add the new network object.
Figure 28-59
Define the inside network addresses, and click OK.
b.
OL-20339-01
Add NAT Rule Dialog Box
Setting the Interfaces
Adding a New Network Object for the Inside Network
Configuration Examples for Twice NAT
to add a new network object for the inside
Cisco ASA 5500 Series Configuration Guide using ASDM
28-29