Cisco ASA 5505 Configuration Manual page 550

Configuration Examples for Network Object NAT
Figure 27-50
Choose the new network object by double-clicking it. Click OK to return to the NAT configuration.
c.
Figure 27-51
Configure the real and mapped interfaces by clicking Advanced:
Step 5
Figure 27-52
Step 6 Click OK to return to the Edit Network Object dialog box, click OK again, and then click Apply.
Cisco ASA 5500 Series Configuration Guide using ASDM
27-28
Defining the Static NAT Group of Addresses
Choosing the New Network Object
Configuring Interfaces
Chapter 27 Configuring Network Object NAT
OL-20339-01