Configuring A Class For Resource Management - Cisco ASA 5505 Configuration Manual

Chapter 6 Configuring Multiple Context Mode
Prerequisites
Perform this procedure in the system execution space.
Detailed Steps
Command
Step 1
copy flash:old_running.cfg startup-config
Example:
hostname(config)# copy
flash:old_running.cfg startup-config
Step 2
mode single
Example:
hostname(config)# mode single

Configuring a Class for Resource Management

To configure a class in the system configuration, perform the following steps. You can change the value
of a particular resource limit by reentering the command with a new value.
Prerequisites
Perform this procedure in the system execution space.
Guidelines
Table 6-1
Table 6-1 Resource Names and Limits
Rate or
Resource Name Concurrent
mac-addresses Concurrent
conns Concurrent
or Rate
inspects Rate
OL-20339-01
lists the resource types and the limits.
Minimum and
Maximum Number
per Context System Limit
N/A 65,535
N/A Concurrent connections:
See the
Feature Licenses Per
Model" section on
page 4-1
connection limit for your
platform.
Rate: N/A
N/A N/A
Purpose
Copies the backup version of your original running configuration
to the current startup configuration.
Sets the mode to single mode. You are prompted to reboot the
adaptive security appliance.
1
Description
For transparent firewall mode, the number of
MAC addresses allowed in the MAC address
table.
TCP or UDP connections between any two
"Supported hosts, including connections between one
host and multiple other hosts.
for the
Application inspections.
Cisco ASA 5500 Series Configuration Guide using ASDM
Configuring Multiple Contexts
6-15