Traffic Overview Pane; Top 10 Access Rules Pane; Top Usage Status Pane - Cisco ASA 5505 Configuration Manual

Home Pane (Single Mode and Context)
Legend
GUI Element
1
2
3
(not shown)
(not shown)
(not shown)

Traffic Overview Pane

Enabled by default. If you disable basic threat detection (see the
Statistics" section on page
threat detection. The runtime statistics include the following information, which is display-only:
•
•
•

Top 10 Access Rules Pane

Enabled by default. If you disable threat detection statistics for access rules (see the
Advanced Threat Detection Statistics" section on page
that lets you enable statistics for access rules.
In the Table view, you can select a rule in the list and right-click the rule to display a popup menu item,
Show Rule. Choose this item to go to the Access Rules table and select that rule in this table.

Top Usage Status Pane

Disabled by default. This area includes Enable buttons that let you enable the features, or you can enable
them according to the
Services Enable button enables statistics for both ports and protocols (both must be enabled for the
display). The Top 10 Sources and Top 10 Destinations Enable buttons enable statistics for hosts. The top
usage status statistics for hosts (sources and destinations), and ports and protocols are displayed.
Enabling statistics can affect the adaptive security appliance performance, depending on the type of
Caution
statistics enabled. Enabling statistics for hosts affects performance in a significant way; if you have a
high traffic load, you might consider enabling this type of statistics temporarily. Enabling statistics for
ports, however, has a modest effect.
Cisco ASA 5500 Series Configuration Guide using ASDM
3-20
Description
Traffic Overview Pane, page 3-20
Top 10 Access Rules Pane, page 3-20
Top Usage Status Pane, page 3-20
Top Ten Protected Servers Under SYN Attack Pane, page 3-21
Top 200 Hosts Pane, page 3-21
Top Botnet Traffic Filter Hits Pane, page 3-21
51-4), then this area includes an Enable button that lets you enable basic
The number of connections and NAT translations.
The rate of dropped packets per second caused by access list denials and application inspections.
The rate of dropped packets per second that are identified as part of a scanning attack, or that are
incomplete sessions detected, such as TCP SYN attack detected or no data UDP session attack
detected.
"Configuring Basic Threat Detection Statistics" section on page
Chapter 3 Using the ASDM User Interface
"Configuring Basic Threat Detection
51-5), then this area includes an Enable button
"Configuring
51-4. The Top 10
OL-20339-01