Cisco ASA 5505 Configuration Manual page 404

Monitoring OSPF
Click Advanced.
Step 20
In the Retransmit Interval field, enter 15.
Step 21
In the Transmit Delay field, enter 20.
Step 22
In the Hello Interval field, enter 10.
Step 23
In the Dead Interval field, enter 40.
Step 24
Click OK.
Step 25
In the Edit OSPF Properties dialog box, enter 20 in the Priorities field, and click OK.
Step 26
Choose Configuration > Device Setup > Routing > OSPF > Interface.
Step 27
Click the Authentication tab.
Step 28
The Edit OSPF Authentication dialog box appears.
In the Authentication area, click on the MD5 radio button.
Step 29
Step 30 In the MD5 and Key ID area, type cisco in the MD5 Key field, and type 1 in the MD5 Key ID field.
Step 31 Click OK.
Step 32 Choose Configuration > Device Setup > Routing > OSPF > Setup, and click the Area/Networks tab.
Choose OSPF 2 process and click Edit.
Step 33
The Edit OSPF Area dialog box appears.
In the Area Type area, choose Stub.
Step 34
In the Authentication area, choose None, and enter 20 in the Default Cost field.
Step 35
Click OK.
Step 36
In the main ASDM window, choose Configuration > Device Setup > Routing > OSPF > Setup.
Step 37
Click the Process Instances tab and check the OSPF process 2 check box.
Step 38
Click Advanced.
Step 39
The Edit OSPF Area dialog box appears.
In the Timers area, enter 10 in the SPF Delay Time field and 20 in the SPF Hold Time field.
Step 40
Step 41 In the Adjacency Changes area, check the Log Adjacency Change Details check box.
Step 42 Click OK.
Step 43 In the main ASDM window, choose Configuration > Device Setup > Routing > OSPF > Setup, then
click Reset.
Monitoring OSPF
You can display specific statistics such as the contents of IP routing tables, caches, and databases. You
can also use the information provided to determine resource utilization and solve network problems. You
can also display information about node reachability and discover the routing path that your device
packets are taking through the network.
To monitor or display various OSPF routing statistics in ASDM, perform the following steps:
In the main ASDM window, choose Monitoring > Routing.
Step 1
Cisco ASA 5500 Series Configuration Guide using ASDM
21-20
Chapter 21 Configuring OSPF
OL-20339-01