Cisco ASA 5505 Configuration Manual page 315

Chapter 13 Configuring Objects
•
•
Enter the necessary changes.
Step 4
Click OK to save the configuration.
Step 5
You can also click Delete to delete a service object.
Note
Adding and Editing a Service Group
You can associate multiple service objects into a named service group. You can specify any type of
protocol and service in one group or create service groups for each of the following types:
•
•
•
•
Multiple service groups can be nested into a "group of groups" and used as a single group.
This section includes the following topics:
•
•
Adding a Service Group
To add a service object or service group, perform the following steps:
In the Configuration > Firewall > Objects > Service Object/Group pane, click Add.
Step 1
Choose Service Group from the drop-down list.
Step 2
The Add Service Group dialog box appears.
In the Name field, enter a name for the new service group. The name can be up to 64 characters in length
Step 3
and must be unique for all object groups. A service group name cannot share a name with a network
object group.
In the Description field, enter a description for this service group, up to 200 characters in length.
Step 4
By default you can add a service group from an existing service/service group. Select the group from the
Step 5
Name field, and click Add to add the service to the group.
Optionally, you can create a new member:
OL-20339-01
Service Group—Edit Service Group appears.
Protocol Group—Edit Protocol Group window appears.
TCP ports
UDP ports
ICMP types
IP protocols
Adding a Service Group, page 13-7
Editing a Service Group, page 13-8
Configuring Service Objects and Service Groups
Cisco ASA 5500 Series Configuration Guide using ASDM
13-7