Cisco ASA 5505 Configuration Manual page 860

Asa 5500 series
Hide thumbs Also See for ASA 5505:
Table of Contents

Advertisement

MGCP Inspection
MGCP Inspection Overview
MGCP is a master/slave protocol used to control media gateways from external call control elements
called media gateway controllers or call agents. A media gateway is typically a network element that
provides conversion between the audio signals carried on telephone circuits and data packets carried over
the Internet or over other packet networks. Using NAT and PAT with MGCP lets you support a large
number of devices on an internal network with a limited set of external (global) addresses. Examples of
media gateways are:
Note
To avoid policy failure when upgrading from ASA version 7.1, all layer 7 and layer 3 policies must have
distinct names. For instance, a previously configured policy map with the same name as a previously
configured MGCP map must be changed before the upgrade.
MGCP messages are transmitted over UDP. A response is sent back to the source address (IP address
and UDP port number) of the command, but the response may not arrive from the same address as the
command was sent to. This can happen when multiple call agents are being used in a failover
configuration and the call agent that received the command has passed control to a backup call agent,
which then sends the response.
Cisco ASA 5500 Series Configuration Guide using ASDM
38-14
Gateways and Call Agents, page 38-17
Add/Edit MGCP Policy Map, page 38-17
Add/Edit MGCP Group, page 38-18
Trunking gateways, that interface between the telephone network and a Voice over IP network. Such
gateways typically manage a large number of digital circuits.
Residential gateways, that provide a traditional analog (RJ11) interface to a Voice over IP network.
Examples of residential gateways include cable modem/cable set-top boxes, xDSL devices,
broad-band wireless devices.
Business gateways, that provide a traditional digital PBX interface or an integrated soft PBX
interface to a Voice over IP network.
Chapter 38
Figure 38-1
illustrates how NAT can be used with MGCP.
Configuring Inspection for Voice and Video Protocols
OL-20339-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5510Asa 5540Asa 5520Asa 5550Asa 5580

Table of Contents