Configuration Examples for Twice NAT
Figure 28-37
Choose the new network object by double-clicking it. Click OK to return to the NAT configuration.
c.
Figure 28-38
Set the NAT Type to Dynamic PAT (Hide):
Step 5
Figure 28-39
For the Translated Source Address, click the browse button
Step 6
address in the Browse Translated Source Address dialog box.
Add the new network object.
a.
Figure 28-40
b.
Define the PAT address, and click OK.
Cisco ASA 5500 Series Configuration Guide using ASDM
28-22
Defining the DMZ Network 1 Addresses
Choosing the New Network Object
Setting the NAT Type
Adding a New Network Object for the PAT Address
Chapter 28
Configuring Twice NAT
to add a new network object for the PAT
OL-20339-01