Cisco ASA 5505 Configuration Manual page 314

Configuring Service Objects and Service Groups
For information about adding or editing a service group, see the
section on page
Adding and Editing a Service Object
This section includes the following topics:
•
•
Adding a Service Object
To add a service object, perform the following steps:
In the Configuration > Firewall > Objects > Service Object/Group pane, click Add.
Step 1
Choose Service Object from the drop-down list.
Step 2
In the name field, enter a name for the service object. Use characters a to z, A to Z, 0 to 9, a period, a
Step 3
dash, a comma, or an underscore. The name must be 64 characters or fewer.
From the Service Type field, choose the desired type: tcp, udp, icmp, or icmp6 protocol.
Step 4
(Optional) If you chose tcp or udp as the Service Type, enter the following:
Step 5
•
•
•
(Optional) If you chose icmp or icmp6 as the Service Type, enter the following:
Step 6
•
•
If you chose protocol as the Service Type, enter the following:
Step 7
•
•
Click OK to save the configuration.
Step 8
Editing a Service Object
To edit a service object, perform the following steps:
Go to Configuration > Firewall > Objects > Service Object/Group pane.
Step 1
Select an existing service object under the Name column.
Step 2
Click Edit.
Step 3
Depending upon the type of a service object you choose edit, the appropriate Edit window appears:
•
Cisco ASA 5500 Series Configuration Guide using ASDM
13-6
13-7.
Adding a Service Object, page 13-6
Editing a Service Object, page 13-6
Destination Port/Range
Source Port/Range—Lists the protocol source ports/ranges.
Description—Lists the service group description.
ICMP type—Lists the service group ICMP type.
Description—Lists the service group description.
Protocol—Lists the service group protocol.
Description—Lists the service group description.
Service Object—Edit Service Object window appears.
Chapter 13 Configuring Objects
"Adding and Editing a Service Group"
OL-20339-01