Cisco ASA 5505 Configuration Manual page 842

SMTP and Extended SMTP Inspection
Command Recipient Count Criterion Values—Specifies the value details for command recipient
•
count match.
Command Line Length Criterion Values—Specifies the value details for command line length.
•
EHLO Reply Parameters Criterion Values—Specifies the value details for EHLO reply parameters
•
match.
Cisco ASA 5500 Series Configuration Guide using ASDM
37-58
EHLO
ETRN
HELO
HELP
MAIL
NOOP
QUIT
RCPT
RSET
SAML
SOML
VRFY
– Add—Adds the selected command from the Available Commands table to the Selected
Commands table.
Remove—Removes the selected command from the Selected Commands table.
–
– Primary Action—Mask, Reset, Drop Connection, None, Limit Rate (pps).
– Log—Enable or disable.
– Rate Limit—Do not limit rate, Limit Rate (pps).
– Greater Than Count—Specify command recipient count.
Action—Reset, drop connection, log.
–
Log—Enable or disable.
–
Greater Than Length—Command line length in bytes.
–
Action—Reset, drop connection, log.
–
Log—Enable or disable.
–
Available Parameters Table:
–
8bitmime
auth
binarymime
checkpoint
dsn
ecode
etrn
others
Chapter 37 Configuring Inspection of Basic Internet Protocols
OL-20339-01