Configuring the Transparent or
This chapter describes how to configure the firewall mode, routed or transparent, and how to customize
transparent firewall operation.
In multiple context mode, you cannot set the firewall mode separately for each context; you can only set
Note
the firewall mode for the entire adaptive security appliance.
This chapter includes the following sections:
•
•
•
•
This section describes routed and transparent firewall mode, and how to set the mode. This section
includes the following topics:
•
•
•
•
•
•
Information About the Firewall Mode
This section describes routed and transparent firewall mode and includes the following topics:
•
•
OL-20339-01
Configuring ARP Inspection for the Transparent Firewall, page 5-8
Customizing the MAC Address Table for the Transparent Firewall, page 5-11
Firewall Mode Examples, page 5-14
Information About the Firewall Mode, page 5-1
Licensing Requirements for the Firewall Mode, page 5-4
Information About Routed Firewall Mode, page 5-2
Information About Transparent Firewall Mode, page 5-2
C H A P T E R
Routed Firewall
Cisco ASA 5500 Series Configuration Guide using ASDM
5
5-1