Cisco ASA 5505 Configuration Manual page 325

Chapter 13 Configuring Objects
The time range is inclusive of the times that you enter.
(Optional) To specify additional time constraints for the time range, such as specifying the days of the
Step 14
week or the recurring weekly interval in which the time range will be active, click Add, and do one of
the following:
a. Click Specify days of the week and times on which this recurring range will be active, and
choose the days and times from the lists, and click OK.
Click Specify a weekly interval when this recurring range will be active, and choose the days
b.
and times from the lists, and click OK.
Click OK to apply the time range.
Step 15
Click OK to apply the access rule.
Step 16
Creating a time range does not restrict access to the device. This pane defines the time range only.
Note
Add/Edit Time Range Field Descriptions
Time Range Name—Specifies the name of the time range. The name cannot contain a space or
•
quotation mark, and must begin with a letter or number.
• Start now/Started—Specifies either that the time range begin immediately or that the time range has
begun already. The button label changes based on the Add/Edit state of the time range configuration.
If you are adding a new time range, the button displays "Start Now." If you are editing a time range
for which a fixed start time has already been defined, the button displays "Start Now." When editing
a time range for which there is no fixed start time, the button displays "Started."
Start at—Specifies when the time range begins.
•
–
–
–
–
–
Never end—Specifies that there is no end to the time range.
•
End at (inclusive)—Specifies when the time range ends. The end time specified is inclusive. For
•
example, if you specified that the time range expire at 11:30, the time range is active through 11:30
and 59 seconds. In this case, the time range expires when 11:31 begins.
–
–
–
–
–
• Recurring Time Ranges—Configures daily or weekly time ranges.
–
–
–
OL-20339-01
Month—Specifies the month, in the range of January through December.
Day—Specifies the day, in the range of 01 through 31.
Year—Specifies the year, in the range of 1993 through 2035.
Hour—Specifies the hour, in the range of 00 through 23.
Minute—Specifies the minute, in the range of 00 through 59.
Month—Specifies the month, in the range of January through December.
Day—Specifies the day, in the range of 01 through 31.
Year—Specifies the year, in the range of 1993 through 2035.
Hour—Specifies the hour, in the range of 00 through 23.
Minute—Specifies the minute, in the range of 00 through 59.
Add—Adds a recurring time range.
Edit—Edits the selected recurring time range.
Delete—Deletes the selected recurring time range.
Cisco ASA 5500 Series Configuration Guide using ASDM
Configuring Time Ranges
13-17