Table of Contents
Advertisement
MACRO Key Entries
Key operations which are frequently performed can be programmed as MACRO keys. You can run these
key sequences simply by entering the corresponding MACRO keys during key operations.
Procedure
• By the direct MACRO key entries:
• By the MACRO key number entries:
• By scanning a card with the MACRO key code on it: ➝
• By scanning the bar-code of the MACRO key code: ➝
NOTE
• When the [CL] key is programmed in the key sequence for the MACRO key, the operation will stop at the
[CL] key position (pause function), and manual key operations can be performed. The MACRO key
sequence is restarted by entering same MACRO key again.
108
➝
[MACRO n ]
➝
MACRO key number
Scanning the card
Scanning the bar-code
➝
[MACRO #]
Advertisement
Table of Contents
