Supervisor Server/Clerk - Sharp UP-X300 Instruction Manual

Supervisor Server/Clerk

This function is used to substitute a supervisor server/clerk for an ordinary server/clerk. The supervisor
server/clerk can make entries as an ordinary server/clerk by assigning the ordinary server/clerk code. You
can use the supervisor server/clerk function only for substituting for an ordinary server/clerk. When you
enter a supervisor server/clerk key and open an existing guest check, the original server/clerk who usually
controls the guest check will automatically be assigned.
NOTE
This function is unavailable when the "overlapped server/clerk function" is enabled.
Procedure
➝ ➝
(1) Sign on the supervisor server/clerk. ( server/clerk code [CLK #])
(2) Enter the password (if it is required).
(3) Open the table and enter the transaction.
102