Table of Contents
Advertisement
6
Printing Function
Receipt ON/OFF
The receipt ON(printing receipt)/ OFF(no receipting) status can be toggled by touching the [RCPT SW] key.
➝
➝
(Receipt ON)
[RCPT SW]
Copy Receipt Printing
If your customer wants a receipt after you have finalized a transaction with the receipt ON/OFF function in
the "OFF" state (no receipting), touch the [RCPT] key. Your POS terminal will also print a copy receipt when
the receipt ON/OFF function is in the "ON" state.
Validation Printing Function
The POS terminal can perform validation printing when it is connected to a slip printer. For slip printer
information, contact your authorized SHARP dealer.
Procedure
(1) Place a validation slip in the slip printer.
(2) Touch the [VP] key. The validation printing will be started.
NOTE
Programmed compulsory validation printing can be overridden by performing the following operation.
1. Touch the [CANCEL] key.
2. Touch the [VP] key.
➝
➝
(Receipt OFF)
[RCPT SW]
➝
(Receipt ON)
113
Advertisement
Table of Contents
