Transaction Recall - Sharp UP-X300 Instruction Manual

I Transaction recall
Each server/clerk is able to recall his/her finalized transactions for reorder entries, item corrections or
settlement by using the [RECALL] key when the recall function is programmed as "transaction number" for
the revenue center.
The finalized transaction is designated by either the bill number or the transaction number (by programming
for each revenue center).
It is possible to recall the finalized transaction by scanning the bar-code. (The bar-code will be printed on a
bill.)
Procedure
(1) Touch the [RECALL] key, the recall transaction list will be shown.
(2) Perform any of the following operations.
• Select the transaction.
• Touch the [RECALL #] key and key in the bill number (or transaction number) in the ten-key window.
• Scanning the bar-code on the bill.
91