Scale Entries - Sharp UP-X300 Instruction Manual

I Scale entries
This function is used to sell items by weight, and there are two types of weight entry systems available; auto
scale entries and manual scale entries. Auto scale entry is used when the weight is read automatically from
the connected scale (option).
In the case of manual scale entry, the weight is entered by using the ten-key function.
• Auto scale entries
Procedure
Open tare weight entry:
➝
[OPEN TARE]
Tare table number entry:
➝
Tare table number
• Open tare weight: Up to 5 digits (integer + decimal)
• Net weight:
• Base weight:
NOTE
• When you use the programmed base weight, skip the base weight entry (
• When you use a programmed tare table number, skip the tare table no. entry (
• When the PLU is programmed for "compulsory scale entry", it is not necessary to touch the [SCALE] key.
• To issue a receipt which shows only a tare weight (Issuing the Tare receipt):
➝
[OPEN TARE]
• Manual scale entries
Procedure
➝ ➝
Net weight [SCALE]
• Net weight:
Up to 5 digits (integer + decimal)
• Base weight: Up to 2 digits (integer)
NOTE
• When you use the programmed base weight, skip the base weight entry (
• Manual/Refund scale item entry
Procedure
➝ ➝
Net weight [REFUND]
• Net weight:
Up to 5 digits (integer + decimal) which is from the customer's receipt.
• Base weight: Up to 2 digits (integer)
32
➝ ➝
Tare weight [SCALE]
➝ ➝
[SCALE] Base weight
Up to 5 digits (integer + decimal)
Up to 2 digits (integer)
➝ ➝
Tare weight [SCALE]
➝ ➝
Base weight
➝ ➝
[SCALE] Base weight
➝ ➝
Base weight
➝ ➝
[ x ] (Single item entry)
➝
[CASH]
➝
[ x ] (Single item entry)
➝ ➝
[ x ] (Single item entry)
➝
[ x ] (Single item entry)
➝ ➝
Base weight
➝
Tare table number ).
➝ ➝
Base weight
[ x ] ).
[ x ] ).