Table of Contents
Advertisement
Macro key
To program a macro key, select Macro Key from Key Programming.
If you program frequently performed key operations for macro keys, you can enter those key operations
simply by touching the corresponding macro keys in key operations.
There is no limitation for the number of key operations, but keys that can be included in the auto key
sequences are limited to the following keys;
• PLU keys
• Function keys
• PLU key having condiments - When a macro key contains a PLU key having condiments ,
manual key entry can be done in the condiment sequence. After the condiment sequence,
macro key sequence is continued again.
• Key or operation for pop-up window
• Pause key - If the [CL] key is programmed in a macro key sequence, it works as a pause key.
Auto key sequence will stop at the [CL] key and enters into the pause mode, then an operator
can start manual key entry. When the same macro key is pressed again, the PAUSE mode is
terminated and the macro key sequence is resumed.
The following key and operations are not selectable as macro sequences.
• Macro keys
• Operation at the graphical table layout area
• Operation at the open table list area
• Operation at the registration window area
• Operation at the bill separate area
218
Advertisement
Table of Contents
