Step 2: Scan Bar Codes - Honeywell HX3 User Manual

Step 2: Scan Bar Codes

For each mobile device to be configured, follow these instructions.
1. Start eXpress Scan on the HX3 by double clicking the eXpress Scan icon.
2. Enter the bar code password, if any.
3. Click Start.
4. Bar code 1 must be scanned first. The scanned data is displayed in the "Data" text box. The password, if any, entered
above is compared to the password entered when the bar codes were created.
5. If the passwords match, the bar code data is processed and the screen is updated to reflect the number of bar codes
included in the set.
6. If the passwords do not match, an error message is displayed. The current screen can be closed using the X box in the
upper right corner. The password can be re-entered and Bar Code 1 scanned again.
8 - 23