Name Text Box; Id Code Text Box; Buttons; Add - Honeywell HX3 User Manual

When Enable Code ID is set to None, custom code IDs are ignored.
Note: Custom symbologies will appear at the end of the list in the Symbology dialog, and are processed at the beginning
of the list in the scanner driver itself. This allows custom IDs based on actual code IDs to be processed before the
code ID itself.
Note: When Strip: Code ID is enabled, the entire custom Code ID string is stripped (i.e., treated as a Code ID).
The dialog box shown below allows the custom Code IDs to be configured. When incoming data is checked for a custom ID
code, the list is compared in the order displayed in this dialog box.
After adding, changing and removing items from the Custom IDs list, click the OK button to save changes and return to the
Barcode panel.

Name text box

Name is the descriptor that is used to identify the custom Code ID. Names must be unique from each other; however,
the Name and ID Code may have the same value. Name is used in the Symbology drop down box to identify the cus-
tom Code ID in a user-friendly manner. Both Name and ID Code must be specified in order to add a custom Code ID
to the Custom IDs list.

ID Code text box

ID Code defines the data at the beginning of a bar code that acts as an identifier (the actual Code ID). Both Name and
ID Code must be specified in order to add a custom Code ID to the Custom IDs list.

Buttons

Add

Entering data into both the Name and ID Code fields enables the Add button. Click the Add button and the data is
added to the next empty location in the Custom ID list.

Insert

Click on an empty line in the Custom ID list. The Add button changes to Insert. Enter data into both the Name
and ID Code fields and click the Insert button. The data is added to the selected line in the Custom IDs list.

Edit

Double click on the item to edit. Its values are copied to the text boxes for editing. The Add button changes to
Replace. When Replace is clicked, the values for the current item in the list are updated.

Clear All

When no item in the Custom IDs list is selected, clicking the Clear All button clears the Custom ID list and any text
written (and not yet added or inserted) in the Name and ID Code text boxes.
7 - 6