Connecting Input/Output Cables; Usb Cable - Honeywell HX3 User Manual

Each time the HX3 is docked in the powered cradle, the connection between the tethered battery and the HX3 terminates.
Press the Power button on the HX3 and the PWR LED on the cradle will illuminate.
When a battery is in either one (or both) of the battery charging bays, the battery charging bay LED (B1 / B2) is illuminated.

Connecting Input/Output Cables

Route all cables to ensure they are protected from jostling, tugging or being disconnected by passing objects.
The cradle must be receiving power from an external power source before HX3 battery charging can begin.

USB Cable

The cradle provides 5V to the USB Host connector (0.5A) to allow interfacing with an external USB keyboard or USB point-
ing device through the cradle. USB Client connections do not receive power through the cradle.
The USB ports are located on the front of the desktop cradle.
Requires Cable Type:
• USB A Host e.g., scanner
• USB B Client e.g., Activesync cable
1. Ensure there is a stable source of power applied to the USB external device.
2. Turn the device On.
3. Connect the USB-A (Host - left connector) or USB-B (Client - right connector) plug to the appropriate receptacle at the
bottom front of the desktop cradle.
4. USB connected external device and HX3 communication is available.
11 - 5