Peap/Mschap - Honeywell HX3 User Manual

PEAP/MSCHAP

Note: The date must be properly set on the device to authenticate a certificate.
To use PEAP/MSCHAP, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile.
2. Set EAP Type to PEAP-MSCHAP.
3. Set Encryption to WPA TKIP.
4. Set Auth Type to Open.
5. To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other
entries as detailed in this section.
6. See Sign-On vs. Stored Credentials
7. Click the Credentials button.
• No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted
for the User Name and Password when connecting to the network.
• For Stored Credentials, User, Password and the CA Certificate Filename must be entered.
8. Enter these items as directed below.
9. Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
10. Enter the password.
11. Leave the CA Certificate File Name blank for now.
12. Click OK then click Commit. Ensure the correct Active profile is selected on the Main Tab.
13. See Windows Certificate Store vs. Certs Path
14. Once successfully authenticated, import the CA certificate into the Windows certificate store.
9 - 22
(page 9-16) for information on entering credentials.
(page 9-18) for more information on certificate storage.