Provided that the wedge is configured with the above table, below are examples of scanned bar code data and results
of these manipulations.
Bar Code Symbology
EAN-128
EAN-128
EAN-128
EAN-13
EAN-13
EAN-13
I2/5
I2/5
I2/5
I2/5
Code-93
Code-93
Code-39
Code-39 full ASCII
Code-39
Note: Rejected bar codes generate a bad scan beep. In some cases, the receipt of data from the scanner triggers a
good scan beep (from the external scanner), and then the rejection of scanned bar code data by the processing
causes a bad scan beep on the same data.
7 - 8
Raw Scanner Data
]C11234567890123
]C111234567890123
]C1123
]E01234567890987
]E01231234567890987
]E01234
]I04444567890987654321
]I04444567890123
]I0444
]I022245622
]G0123456
]G0444444
]A01234567890
]A41231234567890
]A4
Resulting Data
bbb1234567890xxx
bbb11234567890xxx
< rejected > (too short)
ccc]E04567890yyy
ccc]E0234567890yyy
ccc]E0yyy
< rejected > (too long)
ddd7890zzz
dddzzz
ddd45zzz
< rejected > (disabled)
< rejected > (disabled)
aaa4567890www
aaa1234567890www
< rejected > (too short)