Server Contact - Honeywell HX3 User Manual

Server Contact

Note: Your HX3 screen display may not be exactly as shown above.
Note: Sync Clock
Reset the time on the HX3 based on the time on the Mobile Device Server host PC.
Contact
On Startup – Connect to the Mobile Device Server when the Enabler is accessed.
On Resume – Connect to the Mobile Device Server when resuming from Suspend mode.
On IP Change – Connect to the Mobile Device Server when the IP address of the HX3 changes.
On Ext. Power – Initiate connection to the Mobile Device Server when the device is connected to an external power
source, such as based on a docking event.
Contact Periodically / Periodic Update
Allows the administrator to configure the Enabler to contact the Mobile Device Server and query for updates at a
regular interval beginning at a specific time.
Wakeup device if suspended
If the time interval for periodic contact with the Mobile Device Server occurs, a mobile device that is in Suspend Mode
can wakeup and process updates.
Reboot before attempt
Reboot mobile device before attempting to contact Mobile Device Server.
Require external power
Only connect when the mobile device has external power.
Use relative offset
Dimmed.
8 - 8