Menu Options - Honeywell HX3 User Manual

Menu Options

Note: Your HX3 screen display may not be exactly as shown in the following menu options.
Connection (page 8-7)
Server Contact (page 8-8)
Data (page 8-9)
Preferences (page 8-10)
Display (page 8-11)
Taskbar (page 8-12)
Execution (page 8-13)
Scan Config (page 8-14)
Shortcuts (page 8-15)
SaaS (page 8-16)
Adapters (page 8-17)
Status (page 8-20)
Startup/Shutdown (page
8-21)
8 - 6
Enter the IP Address or host name of the Mobile Device Server. Set the order in which
serial ports or RF connections are used to check for the presence of the Mobile Device
Server.
Setup synchronization, scheduled Mobile Device Server contact, suspend and reboot
settings.
Control when data is transferred between the HX3 and the Mobile Device Server.
Set options for Enabler startup or shutdown and logging. If the Preferences tab is not
present, you may have an older version of the Enabler with the Startup/Shutdown tab.
Set up the Windows display at startup, on connect and during normal mode. The settings
can be adjusted by the user.
Set options for Taskbar. If the Taskbar tab is not present, you may have an older version of
the Enabler with the Startup/Shutdown tab.
Not available in this release.
This option allows the user to configure Enabler settings using a special bar code that is
created by the Avalanche MC Console. Scan Config not currently supported.
Add, delete and update shortcuts to user-allowable applications.
Configure the Enabler to connect with Avalanche on Demand.
Enable or disable network and wireless settings. Select an adapter and switch between
the Avalanche Network Profile and manual settings.
View the current adapter signal strength and quality, IP address, MAC address, SSID,
BSSID and Link speed. The user cannot edit this information.
Set options for Enabler program startup or shutdown. Replaced by Preferences and
Taskbar tabs in some versions of Enabler.