Inserting A Battery Into The Charging Pocket; Remove The Battery From The Charging Pocket - Honeywell HX3 User Manual

Inserting a Battery into the Charging Pocket

Caution! It is important that battery packs are inserted into the charging pocket correctly. Inserting the battery incorrectly
could result in damage to the battery pack or the charger.
Caution! Do not "slam" the battery pack into the charging pocket. Damage may result.
When preparing the battery pack for insertion into the battery charging pocket, hold the battery with the battery charging
contacts in line with the charging contacts in the charging pocket.
The alignment ribs on the standard and extended batteries line up and fit snugly with the rib notches in the charging
pockets. Both the standard battery pack and extended battery packs fit in all pockets. If the battery will not align with the
rib notches, take the battery out, turn it around and insert into the charging pocket again.

Remove the Battery from the Charging Pocket

If necessary, stabilize the charger with one hand before removing a battery from a charging pocket. Grasp the battery
firmly and pull it straight up and out of the charging pocket.
12 - 6