Hx2-3 Options; Communication; Autolaunch Timesync; Disable Snmp - Honeywell HX3 User Manual

HX2-3 Options

Start > Settings > Control Panel > HX2-3 Options
Set options such as IP V6 and time sync.
It may be necessary to warmboot the HX3 after making desired changes. A pop up window indicates if a warmboot is
required.

Communication

Options on this tab configure communication options for the HX3.
Enable TCP/IP Version 6
By default, IPv6 is disabled on the HX3. Click this check box to enable IPv6.

Autolaunch TimeSync

By default, TimeSync does not automatically run on the HX3. To enable TimeSync to run automatically on the
HX3, click this check box.
Synchronize with a Local Time Server
By default, GrabTime synchronizes via an Internet connection. To synchronize with a local time server:
1. Use ActiveSync to copy GrabTime.ini from the My Device > Windows folder on the mobile device to the
host PC.
2. Edit the copy of GrabTime.ini on the host PC. Add the local time server's domain name to the beginning
of the list of servers. You can optionally delete the remainder of the list.
3. Copy the modified GrabTime.ini file to the My Device > System folder on the mobile device.
The System/GrabTime.ini file takes precedence over the Windows/GrabTime.ini file. System/Grabtime.ini
also persists after a coldboot; Windows/Grabtime.ini does not persist.

Disable SNMP

By default, the SNMP agent is running on the HX3. To disable the SNMP agent, check this box.

Wakeup on PWR Button Only

When this option is checked, the only wake up event is a press of the power button. When unchecked (default)
normal wake up events for the HX3 are enabled.

LXE BTRS Enabled

By default, the HX3 uses proprietary handshaking designed for the Honeywell Bluetooth Ring Scanner. Uncheck
this box to use the HX3 with a third party Bluetooth scanner.
5 - 26