Scan Bar Codes - Honeywell Dolphin CT40 Series User Manual

4. Configure the button appearance. As you adjust the settings, the preview of the
5. Drag the preview button to the location where you want it to appear on the
6. Tap Choose Application.
7. Check the box next to all the applications where you want the digital scan
8. Select OK.
9. Tap the Back to return to the Settings screen.

Scan Bar Codes

By default, the computer imager is enabled for scanning. It supports
omni-directional (360°) bar code scanning and an aiming beam is provided to help
assist with targeting bar codes.
Before you start scanning bar codes, go into Settings > Honeywell Settings >
Scanning > Internal Scanner and modify the scan profile to enable only the bar
code symbologies that you need. By reducing the active symbology list, you can
increase scan speed.
1. Point the scanner window at the bar code. For optimum performance, avoid
2. Press and hold any Scan button.
Dolphin CT40 Mobile Computer
button updates.
• Tap Select Button Size, and then choose Small, Medium or Large.
Tap Select Button Color and then choose from seven color options. Default
•
color is black. Tap a dot to select the color, and then select OK to confirm.
• Use the slider under Transparency Level to adjust how transparent the
button appears on the application screen.
screen. Once you have positioned the button, tap the Set Button Location
toggle button to lock it into position.
button to be available.
The digital scan button appears on the screen when you open any of the apps
you selected during the button setup. Tap and hold the button to activate the
imager and scan a bar code.
reflections by scanning the bar code at a slight angle.
39