File Menu Options; Avalanche Update Using File > Settings - Honeywell HX3 User Manual

Some parameters and features described in this section may not be available if you are not running the latest version of the
Enabler. Contact Customer Support

File Menu Options

The Connect option under the File menu allows the user to initiate a manual connection to the Mobile
Connect Device Server. The connection methods, by default, are wireless and COM connections. Any updates
available will be applied to the HX3 immediately upon a successful connection.
The Scan Configuration feature is not supported. The Scan Config option under the File menu allows
Scan Config the user to configure Enabler settings using a special bar code that can be created using the Avalanche
MC Console utilities. Refer to the Wavelink Avalanche Mobility Center User Guide for details.
The Settings option under the File menu allows the HX3 user to access the control panel to locally
configure the Enabler settings. The Enabler control panel is, by default, password protected.
Settings
The default Settings password is system. The password is not case-sensitive.
Avalanche Update using File > Settings
Use these menu options to setup the Avalanche Enabler on the HX3. Change the settings and save them by rebooting
before connecting to the network.
Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink Avalanche Mobility Center
User's Guide for details).
(page 14-1) for upgrades.
8 - 5