Volume And Sounds; Wi-Fi - Honeywell HX3 User Manual

Volume and Sounds

Start > Settings > Control Panel > Volume & Sounds
Note: An application may override the control of the speaker volume. Turning off sounds saves power and prolongs battery
life.
Set volume parameters and assign sound WAV files to CE events using these options. You can also select / deselect
sounds for key clicks and screen taps and whether each is loud or soft. As the volume scrollbar is moved between Loud
and Soft, the HX3 emits a tone each time the volume increases or decreases. Volume must be enabled when you want to
adjust volume settings using keypad keys.
Setting
Volume
Events
Application
Notifications
Volume
Key click
Screen tap
Sounds
Scheme
The volume setting is stored in the registry and is recalled at power on.
Rejected bar codes generate a bad scan beep. In some cases, the receipt of data from the scanner triggers a good scan
beep from a tethered scanner, and then the rejection of scanned bar code data by the bar code processing causes a bad
scan beep from the mobile device on the same data.
Good Scan and Bad Scan Sounds
Good scan and bad scan sounds are stored in the Windows directory, as SCANGOOD.WAV and SCANBAD.WAV. These
are unprotected WAV files and can be replaced by a WAV file of the user's choice.
By default a good scan sound on the HX3 is a single beep, and a bad scan sound is a double beep.

Wi-Fi

Start > Settings > Control Panel > Wi-Fi or click the Summit Client Utility icon
Use this option to set parameters and manage profiles for the HX3 wireless client.
See Summit Client Utility
5 - 52
Default
Enabled
Enabled
Disabled
Middle of Bar
Disabled
Disabled
LOUD!
(page 9-1) for information and instruction.