Honeywell HX3 User Manual page 177

15. Return to the Credentials screen and check the Validate server check box.
Note: Some servers may be configured to allow only a single use of the password for PEAP/GTC. In this case, wait
for the token to update with a new password before attempting to validate the server. Then enter the new
password, check the Validate Server check box and proceed with the certificate process below.
If using the Windows certificate store:
1. Check the Use MS store check box. The default is to use the Full Trusted Store.
2. To select an individual certificate, click on the Browse button.
3. Uncheck the Use full trusted store check box.
4. Select the desired certificate and click Select. You are returned to the Credentials screen.
If using the Certs Path option:
1. Leave the Use MS store box unchecked.
2. Enter the certificate filename in the CA Cert text box.
3. Click OK then click Commit.
4. The device should be authenticating the server certificate and using PEAP/GTC for the user authentication.
5. Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU Main tab shows the device is
associated after the radio connects to the network.
9 - 25